Industrial Temperature Instruments

Being a customer-focused organization, we are engaged in offering Temperature Scanner. The offered temperature scanners are highly applicable to indicate process parameters, temperature and scanned channels. Moreover, these are widely used for measuring winding & bearing temperatures of turbines and alternators.

Features:

• High visibility LED display
• Individual channel zero calibration for lead resistance calibration
• 4, 6, 8 or 10 channel versions
• Auto scan/hold/manual display modes
• PT100 temperature sensor input with better that 0.25% accuracy
• Rugged high reliability design for harsh operating conditions
• Also available in panel mount/wall mount or flameproof enclosures Economically priced compact unit
• Up-to 10 Channels Input
• High Brightness LED Display
• High Accuracy
• Individual Channel Zeroing for High Calibration accuracy

Additional Information:

Item Code: DTM-705

Product Details:

• Compatible with 21 CFR Part 11 SCADA Software
• Built in Sensor Non Linearity correction to DIN 43760
• State of the Art Microprocessor based “FAULT TOLERANT DESIGN”
• High brightness 4 digit LED display
• RTD PT100 DIN 43760 Input
• Wide range -100 to + 400°C
• Resolution of 0.1°C over full range with Accuracy of 0.1% Span ± 0.2°CS
• Single / Two point Software Calibration
• Non Volatile memory for Calibration data retention
• Flameproof IS2148 – 2004 Gas Gr.II A, B enclosure
• Digital Communication Interface on RS485 MODBUS / 4-20 mA Output

• State of the Art Microprocessor based “FAULT TOLERANT DESIGN”
• High brightness 4 digit LED display
• RTD PT100 DIN 43760 Input
• Wide range -50 to + 200°C
• Accuracy of 0.1% Span ± 0.2°C
• Built in Sensor Non Linearity correction to DIN 43760
• Non Volatile memory for Calibration data retention
• Flameproof IS2148 – 2004 Gas Gr.II A, B enclosure

Additional Information:

Item Code: TI701

Minimum Order Quantity: 10 Number

Innovation is our forte and we strive to design and develop Compact Temperature Indicator. These indicators find their wide applications in water management, engineering, chemical and other allied industries. Before the end delivery, these indicators are stringently checked by the quality analyzers on varied parameters to ensure their flawlessness.

Features:

• Rugged high reliability design for harsh operating conditions
• Flameproof gas Gr IIA, B, IS 2148-2004
• High visibility LED display
• PT100 temperature sensor input with better than 0.1% accuracy
• Ground referenced 4-20 mA output for data acquisition
• External calibration – No compromise on safety
• Simple 2” pipe mounting
• Also available in panel mount/wall mount versions
• Certified Flame Proof IS2148-2004, Gas Gr. II A, B
• High Precision, High Accuracy
• Sensor Linearization better than 0.25% FS
• External Calibration for Complete safety
• 2” pipe mounting for easy installation
• Retransmission Output for Data

Additional Information:

Item Code: DTM-700

We are instrumental in catering to the variegated requirements of the customers by bringing forth Temperature Controller. Developed in-line with the universally accepted quality standards, the range is widely used in furnace and chiller applications in numerous industries.

Features:

• High visibility bright LED display
• PT100 temperature sensor input with better that 0.1% accuracy
• 2 set point dead band control
• V.high safety alarm (3rd set Point)
• Rugged high reliability design for harsh operating conditions
• Flameproof gas Gr IIA, B, IS 2148-2004
• External calibration – No compromise on safety
• Ground referenced 4-20mA output for data acquisition
• 2 Set point Dead Band On Off Control with
• Independently adjustable High & Low set points
• Externally accessible Calibration & Set point adjustment potentiometers
• Control inhibit on sensor fault (Open or Short)
• Sensor to within 0.25% of Temperature
• 4 - 20mA DC Retransmission output for DAS

Additional Information:

Item Code: DTM-703P

Owing to our vast experience of the industry, we are offering Digital Temperature Indicator. Advanced technologies and quality raw material are applied by the experts in designing and manufacturing these indicators. These devices can be availed by the clients in various forms as per their requirements. We offer these temperature indicators to the clients at market-leading prices.

Features:

• Compatible with 21 CFR Part 11 SCADA software
• High brightness 4 digit LED display
• State of the art Microprocessor based fault tolerant design
• Wide range: -100 to +400ºC with 0.1ºC resolution
• Flameproof Gas Gr IIA, B, IS 2148-2004
• External calibration – No compromise on safety
• High visibility LED display
• Single / Two point Software Calibration
• Digital data transmission for zero error data recording
• PT100 temperature sensor input with better than 0.1% accuracy
• Rugged high reliability design for harsh operating conditions
• Keyboard operation without opening the front cover
• Also available in panel mount/wall mount version
• Sensor cable resistance compensation
• Non Volatile memory for Calibration data retention
• Digital Communication Interface on RS485 MODBUS
• Built in Sensor Non Linearity correction to DIN 43760

Additional Information:

Item Code: DTM-700C

Our organization is counted among the most distinguished manufacturers and suppliers of Digital Temperature Controller. The offered digital temperature controllers are widely used in furnace and chiller applications in numerous industries. These controllers are equipped with easy to use key pad and dust-proof membrane in front to ensure easy usage.

Features:

• High visibility LED display
• Flameproof gas Gr IIA, B, IS 2148-2004
• External calibration – No compromise on safety
• PT100 temperature sensor input with better that 0.1% accuracy
• Rugged high reliability design for harsh operating conditions
• Dead band control with programmable hysteresis
• Externally operable keyboard
• Fail safe V.High safety alarm
• Ground referenced 4-20 mA output for data acquisition
• 21CFR part 11 compliant
• Also available in panel mount/wall mount versions
• RS 485 Modbus RTU communication
• Digital data transmission for zero error data recording
• Compatible with 21 CFR Part 11 SCADA software.
• State of the art Microprocessor based fault tolerant design.
• High brightness 4 digit LED display
• Wide range, -100 to +400’C
• Resolution of 0.1’C over full range
• Built in Sensor Non Linearity correction to DIN 43760
• Single / Two point Software Calibration
• Dead Band Heat / Cool Control
• Independent Fail Safe V.HI / V.LO Safety Alarm
• Non Volatile memory for Calibration data retention
• Flameproof Gas Gr.II A, B enclosure.
• Digital Communication Interface on RS485 MODBUS

Additional Information:

Item Code: DTM-703C